| Circulator | Frequency range (MHz) | Avg. power max. W | Spec. in temperature range | Temperature range °C | Outline drawing | Connector (female) |
| Isolation min. dB | Inse. loss max. dB | VSWR max. |
| BA4140 | 138 - 155 | 250 | 45 | 0.8 | 1.25 | 0 to +70 | P0 | N |
| BA4113 | 155 - 174 | 250 | 45 | 0.8 | 1.25 | 0 to +70 | P0 | N |
| BA4217 | 200 - 207 | 100 | 45 | 1.0 | 1.30 | -10 to +55 | P0 | N |
| BB4110 | 380 - 430 | 100 | 45 | 0.8 | 1.25 | -10 to +55 | P2 | N |
| BB4111 | 406 - 470 | 100 | 40 | 0.8 | 1.25 | -10 to +55 | P2 | N |
| BB4112 | 424 - 428 | 100 | 50 | 0.5 | 1.25 | -10 to +55 | P2 | N |
| BB4113 | 460 - 468 | 100 | 50 | 0.5 | 1.25 | -10 to +55 | P2 | N |
| BB4003 | 470 - 600 | 50 | 35 | 1.1 | 1.30 | -10 to +55 | P2 | N |
| BC4107 | 870 - 960 | 50 | 45 | 0.7 | 1.25 | -10 to +55 | P4 | N |
| BC4108 | 917 - 960 | 65 | 50 | 0.5 | 1.20 | -10 to +55 | P4 | N |
| BC4109 | 935 - 960 | 65 | 50 | 0.5 | 1.20 | -10 to +55 | P4 | N |
| BD4013 | 960 - 1215 | 100 | 35 | 1.2 | 1.35 | -30 to +70 | P2 | N |
Customised devices available
For more 50 W-CW input power, cooling is necessary by conduction via heat sink (RTH = 0.4°C / W max.)
1) High power device
2) Specifications are absolute maximum ratings at high power (listed Avg. power)
3) With SMA, N connectors or tab integrations depending on max. power level request
4) 200 W-CW on 3: 1 continuous load VSWR. Permanent short circuit duration: 3 sec. max.
100 W-CW on permanent short circuit handling, cooling by conduction via a heat sink
(RTH = 0.4°C/W max.)
5) 10 % bandwidth
For more than 50 W-CW input power, cooling is necessary by conduction via heat sink (RTH= 0.4°C/W max.)
- Frequency band