Derived from the standard slip ring T13HP and designed with the same technology, the T20HP provides a solution for slip rings requiring extremely high performance, and offers multiplicity of power end signal channels.
The standard 30 ring slip ring assembly is mass produced and thus very competitive.
Electrical characteristics
| Term | Specifications |
| Number of rings : | 30 |
| Current rating per ring : | 3 A |
| Acceptable over current : | 6 A (<1s) |
| Dielectric strength : | 500 V DC |
| Insulation resistance : | 100 MΩ at 500 V DC |
| Contact noise : | 10 µV/mA |
| Lead wires cross section : | AWG 22 (0,35 mm2) |
| Nominal voltage : | 48 V |
Mechanical characteristics
| Term | Specifications |
| Material : | Aluminium alloy |
| Operating speed : | 0 to 500 rpm |
| Service life (for 150 rpm) : | 30.106 rotations |
| Torque : | <= 8N.cm |
| Sealing (according to NFC20-010) : | IP 50 |
| Weight : | <= 700 g |
Climatic environment
| Term | Specifications |
| Operating temperature : | -10°C to +75°C |
| Relative humidity : | 45% to 80% |
Mounting arrangement
3 threaded holes (8 mm tapping depth), at 120° on 44 dia. for screws M4
To be ordered under reference :
- T20HP30F2
Mounting arrangement
3 holes at 120° on 60 dia. for screws M4
To be ordered under reference :
- T20HP30F3