Cobham plc
 
 
 

Standard slip rings (T13ER)

T13ER[2]Cobham Avionics - Le Plessis-Robinson, leader in high technology slip rings, extends its range to offer mass produced cost effective products whilst retaining its renowned qualities.

    1. Reliability
    2. Long life
    3. High performance

Through proven technology: precision ball bearings, gold plated rings, gold brushes.


This model, a natural derivative of the standard slip ring T13SD, allows transmission of 24 signals.


Electrical characteristics


Term Specifications
Current rating per ring : 0,5 A
Acceptable over current : 1 A (<1s)
Dielectric strength : 250 V DC
Insulation resistance : 100 MΩ at 500 V DC
Contact noise : 10 µV/mA
Lead wires cross section : AWG 30 (0,0569 mm2)
Nominal voltage : 48 V


Mechanical characteristics


Term Specifications
Material : Thermoplastic
Operating speed : 0 to 150 rpm
Service life (for 150 rpm) : 50.106 rotations
Torque : <= 9N.cm
Sealing (according to NFC20-010) : IP 50
Weight : <= 140 g


Climatic environment


Term Specifications
Operating temperature : -10°C to +55°C
Relative humidity : 45% to 75%


Driving on the shaft


T13ER3a[1]Groove for M2,5 screw with dog point (according to NFE 27-110)


Tightening torque < 25 N.cm


Advice when coupling : use an elastic coupling


Mounting arrangement


T13ER1a[1]4 PLASTITE screws (2.5 dia, L = 16 mm) supplied with slip ring suitable for attachment to plate thickness of 1.5 to 3 mm


To be ordered under reference :
    1. T13ER18F2 for 18 rings
    2. T13ER24F2 for 24 rings

Mounting arrangement


T13ER2a[1]3 holes at 120° on 41 dia. for screws M3


To be ordered under reference :
    1. T13ER18F3 for 18 rings
    2. T13ER24F3 for 24 rings