![T13EEG[1]](/media/112039/T13EEG[1]_184x200.jpg)
Application of standard slip rings in Medical Research
- 6-12-20 Channels
- Very low torque
- Optimized quality transmission
- Contacts in precious metal
Electrical characteristics
| Term | Specifications |
| Number of rings : | 6, 12 or 20 |
| Current rating per ring : | 0.5 A |
| Acceptable over current : | 1 A (<1s) |
| Dielectric strength : | 500 V DC |
| Insulation resistance : | 500 MΩ at 500 V DC |
| Contact noise : | 10 µV/mA |
| Lead wires cross section : | AWG 30 (0.05 mm²) |
| Nominal voltage : | 48 V |
Mechanical characteristics
| Term | Specifications |
| Material : | Aluminium alloy |
| Operating speed : | 0 to 100 rpm |
| Service life (for 150 rpm) : | 30.106 rotations |
| Torque : | <= 3 cN.cm per ring |
| Sealing (according to NFC20-010) : | IP 50 |
| Weight : | <= 120 g |
Climatic environment
| Term | Specifications |
| Operating temperature : | -10°C to +55°C |
| Relative humidity : | 45% to 75% |
Interconnection : - Fixed end : via mobile studs supplied with locating pin
- Mobile end : via SAMTEC connector reference
SD-104-G-2, (the mobile connectors reference TD-104-G-D.1.1 are supplied with the instrument
Mounting arrangement
![T13EEG1a[1]](/media/74841/T13EEG1a[1].jpg)
3 threaded holes (4 mm tapping depth), at 120° on 27 dia. for screws M2
To be ordered under reference :
- T13HP6F2 for 6 rings
- T13HP12F2 for 12 rings
Mounting arrangement
3 holes at 120° on 41 dia. for screws M3
To be ordered under reference :
- T13EEG6F3 for 6 rings
- T13EEG12F3 for 12 rings
- T13EEG20F3 for 20 rings
Example of configuration
